
	Linux introduction: Selecting an adequate driver (pdf)

----------------------------

Any questions?

Home | Products | PCI boards | Length meas.

1-port serial interface

APCI-7300-3 - Product specifications

1-port serial interface, RS232, RS422, RS485, 20 mA CL, modular mounting

PCI-bus for the universal application in 3.3 V/5 V-systems
RS232, RS422, RS485, 20 mA current loop (active, passive) with or without optical isolation
Modular structure with MX-modules
Port (MX-module) with or without optical isolation
Free mode configuration
128-byte FIFO buffer common interrupt
Automatic direction control for RS485
RTS/CTS handshake-signals at PS422 as option (MX422-PEP)
Transfer mode: Asynchronous, Full-, Half-Duplex
Transfer rate: Programmable up to 115.2 kBaud on request
Protocol: 5-, 6-, 7- or 8-bit character; 1, 1½ or 2 stop bits
Parity: Even, odd, none, characters or blanks
Interrupt lines: Automatic through BIOS
Drivers for Windows 2000, XP (further on request), operation manual for Linux

Download RTX drivers

Ordering information
APCI-7300-3: 1-port serial interface, RS232, RS422, RS485, 20 mA CL, modular mounting
3.3 V/5 VPCI-systems

MX-modules: Please order the modules separately!

MX232-G: RS232 mode with optical isolation
MX232: RS232 mode

MX422: RS422 mode
MX422-G: RS422 mode with optical isolation

MX422-PEP: RS422 mode with optical isolation, RTS/CTS handshake-signals
MX485-G: RS485 mode with optical isolation
MX485: RS485 mode
MXTTY: 20 mA current loop mode (active, passive) with optical isolation

Option:
OPT.QUARZ: Quartz: < 1 Mbaud transfer rate for RS232, RS422, RS485, 20 mA Current Loop

-------------------------------------------------------------------------------------------------------

Any questions? Contact us!

back